FIRST CH TOOLS / Design / 103 TRADING CARD PRINT FIT
Home-printed trading cards, 9 per A4, sized to your printer
For people making their own cards for an event who want the size right before printing on photo paper
01Measure the 100 mm lines
Print the test sheet PDF with your final settings and measure it.
Print settings: Web browser · Plain paper · 100% · With borderChange
Only for home printers on A4. Keep these four the same for the test print and the final print.
02Corrected 9-up sheet (A4)
Any number of portrait images (up to 36). Three images fill 3 spaces each; from 10 on, sheets are added. 745 × 1040 pixels or more prints cleanly.
Each front sheet is followed by a back sheet with the columns swapped. Print double-sided, flipping on the long edge. Without duplex, print the fronts, turn the paper over and feed it again.
Extends the artwork 1 mm past the outer edges so a slightly off cut leaves no white edge. Inner edges touch the next card, so they need none.
Check on plain paper before photo paper
- Print this PDF once on plain paper with the same settings.
- Measure between the cut marks: each card should be 63 mm wide and 88 mm tall.
- If it matches, print the final run on photo paper. If not, print the test sheet again, measure its lines and type the new lengths.
Each print can shift a little, so an exact fit cannot be promised.
How to Use
- Measure the test printPut a ruler on the 100 mm lines.100 mm → 97.0 mm
- Type the lengthsCards are drawn larger by the shrink.97.0 mm → 103.1%
- Check on plain paperIf the cut marks match, print on photo paper.63 × 88 mm
About this tool
If the 100 mm line measured 97.0 mm, cards are drawn at 103.1% (100 ÷ 97.0), vertical and horizontal separately. If 9 cards no longer fit inside the 5 mm margin of A4, you are first asked to check the scale setting; for printers that really do shrink that much, you can make 6 or 4 per sheet instead.
Choose as many images as you like: fewer than nine repeat in order, more add sheets. With a back image, each front sheet is followed by a back sheet with the columns swapped, ready for long-edge double-sided printing. Bleed is added only around the outside of the grid (if your image already has a 3 mm bleed, that artwork is used).
The image is never uploaded; the PDF is made on this device. Only the lengths and settings are kept.